Hybrid Inverters

Product Detail

Yueqing Sandi Electric Co.,Ltd is one of the leading China hybrid inverters manufacturers, welcome to wholesale cheap hybrid inverters from our professional factory.

Technical Parameters 


Model		SDP-8KW
Isolation mode		Low Frequency Transformer
DC Input	Rated voltage (Vdc)	48V		120V	192V
	Rated current(A)	166.6A		67A	42A
AC Output	Rated output power	8KW
	Output waveform	Pure Sine Wave
	Rated Voltage	220V±3%	110/220V or 120/240V			380VA±3%
	Phases	Single phase	Split phase 3 wires + ground			3 phase 4 wire
	Rated current (A)	36A	36A(phase current)			12A (phase current)
	Frequency	50Hz or 60Hz
	Rated output voltage range (V)	110/120/220/230/240/380/400/415/440VAC optional
	Phases	Single / Two/ Three phase optional
	Power Factor (PF)	>0.95
	Overload Ability	150%, 5 seconds
	Efficiency	>94%
	Waveform distortion rate (THD)	<3%(Linear load)
	Dynamic Response  (0 to 100% load)	5%,=50ms
	Display	LCD
	Running mode	Working continuously
	Electrical insulation properties	2000Vac, 1 Minute
AC Bypass Function		Optional
Solar Charge Controller built in		Optional
AC to DC battery Charger built in		Optional
RS485 remote monitoring		Optional
Wide voltage input 100-850VDC(optional)		Off grid inverter can work without battery
Protection Function	Protection	Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
	Cooling method	Fan-cooled
	Short-circuit protection	No automatic recovery, need to restart the machine
Working environment	Noise ( 1 meter)	=50dB
	Degree of protection	IP20(indoor)
	Working Altitude (m)	=2000
	Working temperature	-25~+55?
	relative humidity	0~90%,non-condensing
Mechanical dimension	Depth* Width * Height	500x600x860mm
	Weight (Kg)	100Kg
Certification	European CE(EMC & LVD), SAA